Archive
 
 
  Topic: Ctrl Up & Down Arrows Missing Some Stations (1 replies)
#1     Sun Jan 28, 2007 9:46 am
W1PI
Sebring, Florida
 
Join Date: Oct 2006
Posts: 34
Subject: Ctrl Up & Down Arrows Missing Some Stations

I've noticed that when searching for online stations with the Control Up or the Control Down Arrows, that CQ100 will often miss stations that are close to each other, particularly if they are less than 5khz apart. This is not a huge problem but something that has been observed. Is it possible to fix this glitch?

Additionally, if the Sweep is set at 50Khz, clicking on a visible spike will take you to the frequency next to it. It requires a mouse click to the left or right of the spike in order to force focus to that frequency. Just another observation.

Clay, W1PI
__________________
#2     Sun Jan 28, 2007 2:13 pm
VE3EFC
 
Join Date: Aug 2006
Posts: 724
Subject:

Hi Clay,

I tried to make the tuning behaviour magnetic so it attracts to the nearest spike. This causes some stickiness problem with closely spaced signals. If I zoom in to 50 kHZ Sweep, its easier to tune within a close cluster of signals.

73 Doug
__________________




Copyright ©2013 Cormac Technologies Inc.